Shark EP621 Mesures De Précaution, Changing & Cleaning the Exhaust Filter, Operating Instructions

Models: EP621

1 18
Download 18 pages 53.17 Kb
Page 10
Image 10
MESURES DE PRÉCAUTION
Fig. 16

OPERATING INSTRUCTIONS

MESURES DE PRÉCAUTION

Warning: Always empty the dust cup container and

clean the HEPA filter, filter ring and Debris Screen before each use and

Changing & Cleaning the Exhaust Filter

The exhaust filter is a rinseable filter but should be replaced every three (3)

Important: Si l’orifice de succion ou le boyau de l’aspirateur est BLOQUÉ, arrêtez l’aspirateur et retirez l’obstruction avant de l’utiliser de nouveau.

during prolonged usage.

Never over fill the dust cup container

-remove dirt and clean the HEPA filter, filter ring and debris screen when dirt in dust cup is at or below the "MAX" level or during prolonged usage because you could risk damaging the motor.

If you wash the Hepa filter and filter ring, make sure that they have completely air dried for 24 hours before inserting back into the vacuum.

Please Note: The HEPA Filter is washable. It should, however, be replaced every three (3) to six (6) months to ensure peak performance of your vacuum.

The exhaust filter and filter ring are also rinseable but they should be air dried for 24 hours before replacing into the vacuum. They should however be replaced every three (3) months to ensure peak performance of your vacuum.

Important: Make sure that ALL filters are completely dry before re-installing back in the vacuum.

Cleaning the Filter Ring

1.Around the HEPA filter there is a filter ring. This is washable in lukewarm water.

(Fig. 16) To remove the filter ring, slide it off the HEPA filter.

2.We recommend washing the filter ring when you are washing your HEPA

filter. Always allow the filter ring to air dry for

24 hours before replacing onto

the HEPA filter. Never run the vacuum without all the filters in place.

Note: This is a washable filter, but we recommend replacing it every three (3) months.

months.

To remove the exhaust filter cover, depress the filter cover lock and pull the filter cover out. Remove the filter. (Fig. 17)

Rinse the exhaust filter in lukewarm water and air dry the filter completely for 24 hours. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry only. Never operate the vacuum without the exhaust filter in place.

When the filter is dry, replace into the exhaust filter cover and replace on the vacuum.

A severely soiled or clogged filter should be thoroughly rinsed with fresh tepid water. A mild detergent can be used if required.

 

Filter

Exhaust

Cover

Lock

Filter

Cover

 

Fig. 17

1.Ne pas utiliser l’aspirateur près des chaufferettes, radiateurs ou mégots de cigarette.

2.Avant d’insérer la fiche dans une prise murale, assurez-vous que vos mains sont bien sèches.

3.Avant de commencer le nettoyage, assurez-vous d’enlever tout objet de grande taille ou pointu risquant d’endommager l’écran à débris de la coupelle.

4.Pour débrancher la fiche de la prise murale, tirez sur la fiche plutôt que sur le cordon.

5.Évitez d’utiliser l’aspirateur pour aspirer toute matière fumante ou brûlante comme des cigarettes, allumettes ou cendres chaudes.

6.Ne pas utiliser l’aspirateur sans que tous les filtres soit en place.

8

25

Page 10
Image 10
Shark EP621 owner manual Mesures De Précaution, Changing & Cleaning the Exhaust Filter, Cleaning the Filter Ring