8
TOLL FREE: 1-800-798-7398
To reduce the risk of ele ctric shock, unplug the un it before assembling, addin g or removing attachment s or
converting modes.
WARNING: The On/O ff switch is on the top of the L ift-Away® cani ster. Always ensure the power is OFF
(“O” position) before plugging and unpluggin g.
TO ASSEMBLE:
1 Place the floor nozzle on a level surfac e.
2 Align th e tube of the floor nozzle with t he tube on
the Lift-Away ® canister and lower until you hear
the two pieces click into place. (Fig. 8)
When attaching the motorized floor brush, ensure
that the latching mechanism is fully lo cked in place
to ensure electrical connec tion has been made.
3 Attach the end of the extension wand to t he tube
on the back of the Lift- Away® canister until it
clicks into place. (Fig. 9)
4 Slide the acc essory holder (a) positioned opposite
the upper cord wrap, over the ex tension wand.
Align the tab with the groove and p ush down.
(Fig. 10)
5 Push the handle (b) onto the top of the ex tension
wand until you hear it click into place. (Fig. 10)
6 Insert the end of the stretch hose (c) into the
connector on the back of the L ift-Away® c aniste r.
(Fig. 10)
7 Store the d usting brush (d) and the crev ice tool (e)
on the mounts of the accessor y holder. (Fig. 10)
Fig. 8 Fig. 9
Fig. 10
Mode 1: Upright Vacc
Upper Cord
Storage Wrap
a
d
e
b
NV360_26_IB_E_121119_1.indd 8 12-11-19 8:59 AM