GE 45227-1 Operating Modes, Motion-Activationin RECORD Mode, Before you begin, Set MODE to RECORD

Models: 45227-1

1 32
Download 32 pages 42.69 Kb
Page 15
Image 15
Operating Modes

Operating Modes

The system can be set to operate in one of three modes: RECORD, LIVE or PLAY. The desired operating mode can be selected using the MODE switch on the left side of the IntelliCorder.

Motion-Activation in RECORD Mode

In this mode setting, the IntelliCorder can record high-resolution video with sound of visitors/intruders at your front or back door, even when you are not home.

Before you begin

Check the Battery Indicator

If using an SD memory card, Ensure SD memory card is properly installed. Your IntelliCorder will automatically record to the SD memory card when activated.

1. Set MODE to RECORD.

2. A camera icon

indicates that

the camera is on.

 

3.When motion is detected, the IntelliCorder begins recording shortly after the PIR detects motion. It continues recording until motion has ceased for 5 or 10 seconds (selectable, see Page 20)

4.The IntelliCorder is equipped with internal memory for immediate recording storage. Video files are stored as standard AVI computer files in MPEG4 format. If no SD memory card is detected, files will be stored to internal memory. Internal memory can store up to four minutes of Video in LP

mode. For longer recording time you can use SD memory cards up to 1GB (see page 26). If a SD memory card is detected, video files will store to the memory card. When the memory is full, (either internal or on SD memory card) recording will stop and the Full (Red) indicator light will turn on. This indicates you should replace the memory card or clear the memory. The IntelliCorder can also be set to auto- erase, In this setting it will erase the three oldest files each time.

(See page 22)

5.Use the DISPLAY button to switch between LCD ON/TEXT OFF/LCD OFF. LCD ON allows you to view a scene while in live or record mode. TEXT OFF allows you to view scene in live or revord mode without text appearing on the screen. LCD OFF allows a scene to be recorded without viewing. You can use this position to conserve battery power, but still record a scene for viewing at a later time. Date, time, length of recording, and file number are always recorded and will be displayed on the screen

during playback.

A FINE

1:20

15

01/01/2 005 12:00

Page 15
Image 15
GE 45227-1 Operating Modes, Motion-Activationin RECORD Mode, Before you begin, Check the Battery Indicator, A camera icon