Sharp 54GS-61S operation manual Switching on, Power supply on/off button, On-Off/Stand-by button

Switching on

Power supply on/off button

This TV memorizes the Mode last used when it was switched off. When the main power button ( l) is pressed to turn on the set, the power indicator will light and the set will resume in either the Stand-by mode or Programme mode, depen- ding upon its condition when it was switched off.

54GS-61S 70GS-61S

Power Indicator	Power Indicator
Main power button	Main power button

On-Off/Stand-by button

When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but- ton (æ TV) on the remote control, or one of the four buttons on the TV ( Va/\, VCH/\ ). The TV will change from Stand-by mode to Program mode, the sound indicator will light a few moments and an image will appear on the screen. Press the Stand-by button ( æ TV) again and the TV will return to Stand-by mode.

Blue back off timer

If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati- cally switch the set to Stand-by mode after 15 minutes.

Real Channel Number (terrestrial/cable TV Programmes)

Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in hand.

Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your own channel number to a real channel and store it in the programme channel memory.

CORRESPONDING REAL CHANNEL

	STATION SIGNALS		REAL CHANNEL NUMBER	ESPECIALLY AVAILABLE
V	E-2 ~ E-4		CH 02 ~ CH 04
H
	E-5 ~ E-12		CH 05 ~ CH 12
F
	A ~ H		CH 13 ~ CH 20	In Italy
UHF	E-21	~ E-69	CH 21 ~ CH 69
C	M1/S1 ~ M10/S10		CC 01 ~ CC 10
	U1/S11 ~ U10/S20		CC 11 ~ CC 20
A
	S21	~ S41	CC 21 ~ CC 41
T	M1	~ M7	CC 42 ~ CC 48	In Holland
	B1	~ B7	CC 49 ~ CC 55
V
	S’1/S21 ~ S’5/S25		CH 75 ~ CH 79	I n Switzerland

8