INSTALLATION INSTRUCTIONS
6 Insert the closure assemblies on both sides into the rails of the jamb.
Closure assembly (Left)
Jamb (Left)
Closure assembly (Left)
Indoor 
side
1/2 inch (13mm)
| Sill |
7 | Stool |
(1) Secure the cabinet to the window | |
stool with 3 screws (L=1", 25.4 mm), |
working from the inside of the cabinet.
(2) Secure the top angle and the closure assemblies to the window sash with 3 screws (L=1", 25.4 mm).
(3) Secure the closure assemblies to the
sill with 2 screws (L=1", 25.4 mm).
8 | (1) Slide the chassis back into the cabinet. |
| |
| (2) Replace the 4 screws removed in |
| step 3 to the top and side of the cabinet . |
Top angle
9 | (1) | Replace the front panel. Slip the ex- |
| haust lever through the opening |
between the horizontal louver and the front panel then, hook the cabinet top.
CAUTION:
Take care not to damage the exhaust lever with the front panel.
(2)Screw the front cabinet on at the bottom corners with 2 screws removed in step 2.
10 Cut the window sash foam seal to the proper length and seal the opening be- tween the top of the inside window sash and the outside window sash.
Horizontal
Louver
Front | Exhaust Lever |
Panel |
|
Window sash foam seal
7
