HOW TO OPERATE
OPERATING WITH THE REMOTE CONTROL
TRANSMITTER
POWER |
| |||
| ON/OFF | POWER ON / OFF button | ||
|
|
| ||
|
|
| Push to start or stop the operation. | |
TEMP. | ||||
|
TEMP.
SELECTOR
SET TIMER/OFF
TEMPERATURE setting button
TEMP.
SELECTOR button | HIGH COOL | |
|
| |
Push to change fan speed, or to select | MED | COOL |
| ||
fan only mode. | LOW | COOL |
Fan speed selections are shown to the | FAN | ONLY |
right. |
|
|
SET TIMER / OFF button
Push to set delay "OFF" timer during operation.
•The time setting will change as you push the button. The display will change as follows;
NOTE:
•The "ON" TIMER cannot be set with the remote control.
It can only be activated by the TIMER ON/OFF pad on the unit's control panel ( See page 14 ).
Preset(0.5h) |
|
|
| 1.0h |
|
|
|
|
| |||
| 0.5h |
| 1.5h |
|
| 10h | ||||||
Previous setting |
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||||
| CL(cancel) |
|
| 12h |
|
|
| 11h |
|
•The last OFF time setting is memorized by the unit and will appear on the display when the button is pushed.
•The timer will be set, 5 seconds after the SET TIMER / OFF button is pushed for the last time.
•If you wish to cancel the timer, push the SET TIMER / OFF button again after the time is set or, push the SET TIMER / OFF button until CL (cancel) appears on the display. A double beep will sound when the timer is cancelled.
To Change the Temperature Setting When the ON / OFF Timer Is In Use
1.Push a TEMPERATURE setting button.
The current set temperature will be recalled on the unit's display.
2.Use the TEMPERATURE setting buttons to set the new temperature.
The new set temperature will show on the display for 5 seconds and return to the time display.
17