Sharp AL-1661CS Press the, "4:USER PROGRAM, recall interval, "10:RECALL INT. BUSY, 1 Press the [MENU] key, 5 Press the [ENTER] key, until "4:USER PROGRAM" appears

INITIAL SETTINGS

SETTING THE RECALL INTERVAL

The machine will automatically reattempt transmission when a transmission is not successful because the line is busy or a communication error occurs. This setting is used to select the interval between recall attempts.

• If a transmission is still not successful after the set number of recall attempts is made, a report will

Note	print and the document will be cleared from memory.
	• If a communication error occurs because the memory becomes full during transmission, no recall
	attempts will be made.
	• Recall attempts for a direct transmission will only be made when the RSPF is used. Recall attempts
	will not be made when the document glass is used.
	• When the machine is waiting to make a recall attempt for a direct transmission, other operations
	such as storing a transmission or selecting a function cannot be performed.

When the line is busy

You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be		2
selected.
1 Press the [MENU] key.	5 Press the [ENTER] key.

2 Press the [ ] key ( ) or [ ] key ( )	6 Press the [CLEAR ALL] key ( ).
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.	Press the [CLEAR ALL]
	key ( ) to exit.
Selection

"4:USER PROGRAM"

3Press the [] key ( ) or [] key ( ) until "10:RECALL INT. BUSY" appears, and then press the [ENTER] key.

Selection

"10:RECALL INT. BUSY"

4Press the numeric keys to select the

recall interval.

Enter the recall interval ("01" to "15").

33