Sharp AN-PR1000H System connections

AN-PR1000_EN.fm06/3/14 TINSEA127AWZZ

10

AN-PR1000_EN.fm06/3/14

AN-PR1000H

TINSEA127AWZZ

Preparation for Use

System connections



Installing the main unit and the subwoofer

1. Pull up both speakers outwards.

2. Pre-faster the screw to the speaker box.

3. Snap the metal frame onto the screw and fasten the screw fully. Then turn the unit.

4. Stick the metal frame cushion onto the metal frame and place the glass shelf on top

of it.

Notes:

 It is advisable for the top glass cover to be carried by 2 persons.

 Top glass with sticker on its surface, must face outwards.

Aerial connection

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup.

Place the aerial away from the unit for better reception.

External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

Top glass cover cushion

Metal frame cushion

Glass shelf

Top glass cover

Sticker up side

Sticker up side

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket

and position the FM aerial wire in the direction where

the strongest signal can be received.

FM

aerial

External

FM aerial

75 ohms

coaxial cable

Contents

Main Special Notes Contents AN-PR1000_EN.fm06/3/14 Accessories AN-PR1000_EN.fm06/3/14 TINSEA127AWZZ Warning: Precautions Volume control Cooling fan General Controls and indicators Page Page Controls and indicators (continued) DVD Player Operation Buttons (Page 35 - 36) TV Operation Buttons (Page 35) AN-PR1000_EN.fm06/3/14 TINSEA127AWZZ System connections Installing the main unit and the subwoofer Aerial connection External FM aerial Page AN-PR1000_EN.fm06/3/14 TINSEA127AWZZ TINSEA127AWZZ System connections (continued) Placing the TV or other equipment Falling prevention AN-PR1000_EN.fm06/3/14 TINSEA127AWZZ AN-PR1000_EN.fm06/3/14 Audio connections to TVs, DVD players, VCRs, etc. Connecting a TV, etc. TV Connecting a DVD player, etc. Connecting a VCR, etc. DVD player VCR Audio connections to TVs, DVD players, VCRs, etc. (continued) AC power connection Connecting the AC power lead To turn the power on Remote control General control Volume control Muting ..... Subwoofer level control To change the display brightness (2 levels) Display control Setting the clock Listening to the playback sound from DVD players, VCRs, etc. ON/ STAND-BY 1 2 3 4 5 6 7 Enjoying surround sound (sound mode) Enjoying surround sound (sound mode) (continued) Preset sound mode Page Enjoying surround sound (sound mode) (continued) Audistry sound mode Possible combinations Page Radio Listening to the radio TUNER Tuning ON/ STAND-BY 1 2 Radio Using the Radio Data System (RDS) Information provided by RDS NO PS NO PTY FM 98.80 MHz NO RT Using the Auto Station Programme Memory (ASPM) To stop the ASPM operation before it is complete: ASPM SHIFT Notes for RDS operation Using the Radio Data System (RDS) (continued) To recall stations in memory 1 2 3 4 Page Timer and sleep operation Setting the timer SHIFT 1 2 Page Timer and sleep operation (continued) Operating the TV or DVD player with the remote control Operating the TV or DVD player with the remote control (continued) Various operations of DVD player Action Buttons to be used Operation procedure Action Buttons to be used Changing the manufacturer setting of the remote control To change the TV manufacturer setting To change the DVD player manufacturer setting DVD player setting number Direct number buttons Changing the manufacturer setting of the remote control (continued) TV setting number Troubleshooting chart Remote control General Troubleshooting chart (continued) If trouble occurs Error indicators and warnings Maintenance Cleaning the cabinet Specifications Page AUSTRALIA SHARP APPROVED SERVICE CENTRE www.sharp.net.au 1300 135 022 NEW ZEALAND SHARP CUSTOMER SERVICES SHARP APPROVED SERVICE CENTRE WARRANTY SHARP CORPORATION IMPORTANT DO NOT RETURN THIS DOCUMENT TO SHARP TINSEA143AWZZ 06G R AS 1