Sharp AN-PR1000H operation manual Falling prevention

Falling prevention

Safety wires are useful to prevent the TV from falling off in case of earthquake occurance.

AN-PR1000H

1

Pull out the rubber

blocker located behind the TV.

There is a small hole to

fix the screw in.

1Fix the washer and screws behind the TV.

Hang the safety wire on the screw,

2between the washer and the TV. Tighten the screw in.

At the back of the rack unit,

3fix in the washer and the screw.

4the screw and washer. Tighten the screw in.

Loosen the wing nut and pull the safety wire until it is

stretched properly. Tighten back the wing nut.Put the safety wire around

Screw

Washer

Safety wire

Washer

Screw

Wing nut

Preparation for Use

2

3

4

5

6

7

5	Ensure all the screws have
	been fixed properly.

6	Ensure all the wing nuts
	have been fixed properly.

13

8

06/3/14 AN-PR1000_EN.fm TINSEA127AWZZ