27
AN-PR1000_EN.fm06/3/14
AN-PR1000H
TINSEA127AWZZ
2
3
4
5
6
7
8
1
Radio
Memorising a station
You can store 40 FM stations in memory and recall them at the push of a button. (Pre-
set tuning)
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead become disconnected.
To recall a memorised station
To erase entire preset memory
1Perform steps 1 - 3 in "Tuning" on page 26.
2Hold down the SHIFT button and press the ENTER button to enter
the preset tuning saving mode.
3Within 5 seconds, press the SHIFT and PRESET ( or ) buttons
to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4Within 5 seconds, press the SHIFT and ENTER buttons to store
that station in memory.
If the "MEMORY" and preset number indicators disappear before the station is
memorised, repeat the operation from step 2.
5Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorised will
be erased.
Hold down the SHIFT button and press the PRESET
( or ) button for less than
0.5 seconds to select the desired station.
1 Hold the CLEAR button down for 4 seconds or more.
2 Whilst "CLEAR" is flashing, press the SHIFT and ENTER button.