GETTING STARTED
Loading copy paper
LOADING COPY PAPER
To save space, this copier has been designed with an adjustable
The paper required ( 
) indicator will light up when there is no copy paper in the selected paper feed station, or when the paper tray is not installed or is improperly installed.
When the paper size is changed in the paper tray, the size of the paper must be entered by steps 8 through 10 on page 12. If not, the edges of copies may become smudged with toner. Also, the AUTO IMAGE feature will not function properly.
1 Gently lift and pull out the paper tray until it stops.
2
3
Maximum height line
Push the pressure plate down until it locks in place.
Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks.
●If you change to a different size of copy paper, the tray must be adjusted. See the next page.
●Set the paper along the guides.
●The tray holds up to 250 sheets of 21 lb. bond paper. Do not load paper above the maximum height line.
4 Push the paper tray firmly back into the copier.
10
