Self-diagnostic function, Example | Sharp AR-162S manual

COPIER TROUBLE?

Problem		Solution

	● Is	blinking in the copy	A toner cartridge is not installed. Install a toner
	quantity display?		cartridge. If "CH" is blinking even if a
			cartridge is installed properly, contact your
			SHARP service center immediately.

	● Is	steadily lit in the copy	The side cover is open.
Power is on but copying	quantity display?		Close the front and side covers securely.
is not possible.
	● Is the	indicator blinking?	The toner cartridge must be replaced. See page
			28, TONER CARTRIDGE REPLACEMENT.

	● Is the	indicator blinking?	A misfeed has occurred. See page 30,
			MISFEED REMOVAL.

Lighting fixture flickers.	● Is the same power outlet used for		Connect the copier to a power outlet which is
Lighting fixture flickers.	the lighting fixture and the copier?		not used for other electric appliances.

GENERAL INFORMATION Copier trouble?

Be sure to use only genuine SHARP parts and supplies.

Please contact your SHARP service center immediately if a problem persists after checking the above.

Self-diagnostic function

An automatic self-diagnostic function is built into the copier. Should the copier malfunction, the self-diagnostic function will locate the problem and stop the copier to prevent damage. An alphanumeric code will appear in the copy quantity display.

Example

Should the copier completely stop and a letter and a number appear alternately, contact your SHARP service center immediately.

48

Image 50

Sharp AR-162S operation manual Self-diagnostic function, Example

Contents

AR-162S Safety Precautions Contents Introduction Conventions used in this manual Main Features Part Names and Functions Part Names and Functions Paper Size indicators Interrupt key and indicator pZoom indicator p.17 Alarm indicators Original Size Enter key and indicators Start key and indicatorPreset Ratio selector keys and indicators Auto Image key and indicator Copier Installation Do not install your copier in areas that are Do not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Press the Start key and then the Paper Size Enter key Auditing Accounts Enter your account number using the numeric keysWhen copying is completed, press the Audit Clear Key Normal Copying Turn the power switch onAdjust the copy density Normal Copying How to remove the platen coverSet the number of copies using the numeric keys Press the Start key Press the Auto Image key REDUCTION/ENLARGEMENT/ZOOMAutomatic Set the number of copies Press the Start key Set the number of copies and press the Start key REDUCTION/ENLARGEMENT/ZOOMManual Bypass Feed special paper Unfold the bypass tray Bypass Feed special paper TWO-SIDED Copying Press the copy ratio display key XY ZoomPress the XY-ZOOM key Use the Preset Ratio selector , keys and zoom XY Zoom Reverse Press the B/W Reverse key Check the copy paper size Dual page Copy Press the Dual page Copy key Start key to resume copying Interrupting a Copy RUNPress the Interrupt key Replace the original for the interrupted job and press Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light key Push the toner cartridge lock release lever and pull Remove the new toner cartridge from the bag. Grasp Press the light key Toner Cartridge ReplacementToner cartridge life Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray First confirm the misfeed location Rotating knob in the direction of the arrow to assist Misfeed RemovalCarefully remove the misfed paper. Turn the roller Removing it Misfeed in the transport area Misfeed in the paper tray Close the side cover by pressing the handle on Cover Maintenance Required Developer Required Program No Program name Description User ProgramsList of user programs User Programs Setting the user programsEnter a program number using the numeric keys Program name Program No Select the desired parameter using the numeric keys Program name Parameters Enter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 key Program No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Bypass tray paper feed roller User MaintenanceOriginal table and platen cover User Maintenance Transfer charger cleaning Problem Solution Copier TROUBLE? Copier TROUBLE? Self-diagnostic function Example Supplies Types and sizes of copy paper Proper storage SuppliesGenuine supplies statement Store the supplies in a location that is Specifications Specifications Optional Equipment Part Names SpecificationsSingle Pass Feeder AR-SP2 Equipmentoptional Single Pass Feeder AR-SP2 Misfeed removal Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable Limits Routes of Entry Ingredients CAS No ProportionOther Limits Skin? Ingestion? None required under normal use Memo Memo Page Sharp Corporation