13
MAKING COPIES
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not function
until an assigned 3-digit account number has been entered. See page 38 for
setting the auditing mode.
If the copier has been programmed in the auditing mode, “–––” will appear
in the copy quantity display in the initial conditions.
1Enter your account number using the numeric keys.
●As each digit is entered, the dashes in the copy quantity display will
disappear.
●After the number is entered, the copy quantity display will change to
0.
●If an unassigned number is entered, “–––” will appear again in the
copy quantity display, indicating that the number was not accepted.
2When copying is completed, press the AUDIT CLEAR

key.

●“–––” will appear again in the copy quantity display, indicating the
auditing mode.
●In the interrupt copy mode (see page 25), press the INTERRUPT key
after an interrupt copy run is completed. All previous copier settings
will be restored and the previous account number will be active.
Auditing accounts