Settings for auditing accounts | Sharp AR-162S manual

USER PROGRAMS

Settings for auditing accounts

Setting of user programs No. 10 to 15 varies with the program number. For settings of all programs, first follow steps 1 to 3 in “Setting the user programs” on page 36 to select a program. (1. Press the light () key for more than 5 seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3. Press the START key.) Then follow the appropriate instructions for the program.

GENERAL INFORMATION

User programs

Program No. 10: Auditing mode

If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. A maximum of 20, 3-digit account numbers can be assigned. Use program No. 11 to register account numbers.

When program No. 10 is entered, the current setting (0: OFF, 1:ON) will blink on the right side of the copy quantity display.

1.Select the desired setting using the numeric keys.

0: OFF

1:ON

2.Press the START key.

● The setting will be stored.

3. To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light () key.

Program No. 11: Account number entry

Program No. 11 is used to register accounts. When program No. 11 is entered, “–––” will blink in the copy quantity display.

●If the number of accounts has reached the upper limit (20), “11E” will

appear in the copy quantity display. Press the key. The copier will return to step 2 on page 36.

1.Enter a 3-digit account number using the numeric keys.

● Any 3-digit number except “000” can be registered as an account number.

2.Press the START key.

● If a number that is already registered or “000” is entered, the number will blink in the copy quantity display.

3. Repeat steps 1 and 2 for other account numbers.

4.To continue with other user programs, press the key and enter another program number. To exit the user program mode, press the light () key.

38

Image 40

Sharp AR-162S operation manual Settings for auditing accounts, Select the desired setting using the numeric keys

Contents

AR-162S Safety Precautions Contents Introduction Conventions used in this manual Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p Zoom indicator p.17Paper Size indicators Alarm indicators Start key and indicator Preset Ratio selector keys and indicatorsOriginal Size Enter key and indicators Auto Image key and indicator Copier Installation Do not install your copier in areas that are Do not touch the photoconductive drum green portion Gently lift and pull out the paper tray until it stops Loading Copy PaperPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Adjust the copy density Turn the power switch onNormal Copying How to remove the platen cover Set the number of copies using the numeric keysNormal Copying Press the Start key REDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image key Set the number of copies Press the Start key Manual REDUCTION/ENLARGEMENT/ZOOMSet the number of copies and press the Start key Bypass Feed special paper Unfold the bypass tray Bypass Feed special paper TWO-SIDED Copying Press the XY-ZOOM key XY ZoomPress the copy ratio display key Use the Preset Ratio selector , keys and zoom XY Zoom Reverse Press the B/W Reverse key Check the copy paper size Dual page Copy Press the Dual page Copy key Interrupting a Copy RUN Press the Interrupt keyStart key to resume copying Replace the original for the interrupted job and press Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light key Push the toner cartridge lock release lever and pull Remove the new toner cartridge from the bag. Grasp Toner cartridge life Toner Cartridge ReplacementPress the light key Misfeed Removal Misfeed in the bypass trayMisfeed in the copier First confirm the misfeed location Misfeed Removal Carefully remove the misfed paper. Turn the rollerRotating knob in the direction of the arrow to assist Removing it Misfeed in the transport area Misfeed in the paper tray Close the side cover by pressing the handle on Cover Maintenance Required Developer Required List of user programs User ProgramsProgram No Program name Description Setting the user programs Enter a program number using the numeric keysUser Programs Program name Program No Select the desired parameter using the numeric keys Program name Parameters Select the desired setting using the numeric keys Settings for auditing accountsEnter a 3-digit account number using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 key Program No Resetting account Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Original table and platen cover User MaintenanceBypass tray paper feed roller User Maintenance Transfer charger cleaning Problem Solution Copier TROUBLE? Copier TROUBLE? Self-diagnostic function Example Supplies Types and sizes of copy paper Supplies Genuine supplies statementProper storage Store the supplies in a location that is Specifications Specifications Optional Equipment Single Pass Feeder AR-SP2 SpecificationsPart Names Equipmentoptional Single Pass Feeder AR-SP2 Misfeed removal Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable Limits Ingredients CAS No Proportion Other LimitsRoutes of Entry Skin? Ingestion? None required under normal use Memo Memo Page Sharp Corporation