Sharp AR-PB8 Set Up, Procedures on the copier operation panel, Procedures on the copier rear side

AR-PB8

[3] SET UP

1.Procedures on the copier (operation panel)

∗When installing the LCD panel kit simultaneonsly.

A.Copier operation panel disassembly

•Remove screws and connector, and remove the operation panel.

B.Cover disassembly

•Remove screw and disengage pawls, and remove the cover.

C.Printer operation panel installation

•Engage pawls and fix the printer operation panel with screw. Then connect the flat cable to the connector.

2. Procedures on the copier (rear side)

A.Copier rear cabinet disassembly

•Remove screws and remove the rear cabinet.

3 – 1