Sharp AR-PB8 A. Main Menu, B. Network Menu, C. Interface Menu, D. Test Menu, E. PS2 Menu ∗A

AR-PB8

4)Press the Left or Right arrow key to change the setting.

•The current value is marked with an asterisk (∗).

DATA
LINE	MENU	ITEM	ENTER

5)After choosing the required value, press the ENTER key.

•The new value is registered.

DATA
NE	MENU	ITEM	ENTER

A. Main Menu

Item	Possible	Description
	Settings
Copies	1 ∼ 999	Sets how many copies to print.
Resolution	600dpi	Sets the printing resolution.
	300dpi
		Sets whether smoothing is done or not.
		This function improves the appearance
		of printed documents by smoothing the
		angles and curves of images. This
	On	allows printing at a higher apparent
Smoothing		resolution. For example, if the printer is
	Off
		set to 600dpi, resolution equivalent to
		1200dpi can be achieved.
		When printing image data, you may
		need to select "Off" to achieve best
		results.
		Sets whether toner save mode is in
	On	effect or not. This function prints slightly
Toner Save		fainter to save toner. This item is
	Off
		different from the copier “toner save
		mode”.
		Sets page protection. Page protection is
		a function designed to prevent data loss
Page	On	errors when complex data is printed.
Protection	Off	This menu item is displayed only if the
		installed printer memory is 24MB or
		more.
2-Sided	On	Setting of duplex function and binding
Printing ∗B	Off	direction.
	Auto	Sets the tray used for paper feeding.
		Setting to “Auto” automatically selects
	Tray 1
		the paper tray loaded with the paper of
Paper	Tray 2∗
		the size specified in the “Paper Size”
Source	Tray 3∗
		item.
	Tray 4∗
		∗ The available settings reflect the
	Bypass Tray
		installed trays.

Item	Possible	Description
	Settings
	A3
	B4
	A4∗
	B5	Sets the size of the paper where data
	A5
		will be printed. If this size is different
	Ledger
		from the paper size present in the tray,
	Legal
		the size set on the operation panel takes
Paper Size	Letter∗
		precedence.
	Executive
		∗ Depending on where the printer was
	Folio
		purchased, the default value is either A4
	Invoice
		or Letter.
	Foolscap
	COM-10
	DL
	C5
		Sets the page orientation for printing.
		Specify “Portrait” to print the paper with
Orientation	Portrait	its long side (longer edge) vertical.
	Landscape	Specify “Landscape” to print the paper
		with its long side (longer edge)
		horizontal.
	Auto
Emulation	PCL	Specifies the printer language used.
	HEX

B. Network Menu

Item	Setting Choice	Description
Set IP Address	Yes	Sets the IP address.
	No
Set Subnet Mask	Yes	Sets the subnet
	No	mask.
Set Default Gateway	Yes	Sets the default
	No	gateway.
Enable TCP/IP	YES	Enable/Disable
	NO	TCP/IP
Enable Netware	YES	Enable/Disable
	NO	Netware
Enable EtherTalk	YES	Enable/Disable
	NO	EtherTalk
Reset to Defaults	YES	Reset Print Server
	NO	Card to default.

∗Displayed only if the optional Network Interface Control card is installed.

C. Interface Menu

Item	Setting Choice	Description
	1 second	Sets I/O time-out. If
	:	no data is received
I/O Time Out	60 second	within the preset
	:	time, print
	999 second	processing is ended.

D. Test Menu

Item	Description
Configuration Page	Prints the configuration page.
PCL6 Font List	Prints the PCL6 font list.
PS2 Font List∗1, ∗A	Prints the PS2 font list.

∗1 Displayed only when the PS Kit (AR-PS1) is installed.

E. PS2 Menu ∗A

Item	Description
Print PS2 Error	When set to “On”, PS error print is made.

∗Displayed only when the PS Kit (AR-PS1) is installed.

4 – 2