6)Print a test page by clicking the [Finish] button.
Note: If you check “No” and click the [Finish] button, the printer does not print a test page after the installation.
• The printer driver installation begins.
•If the “Insert Disk” window appears, perform the following steps:
<1> Click the [OK] button.
<2> When the “Copying Files” window appears, type R:\English\WinXX and click the [OK] button.
7)When the test page is printed properly, click the [Yes] button.
• The printer is ready for printing.
B. Installing onto Windows 98
This printer is compatible with plug & play. If your computer is incom- patible with plug & play or if you want to use this printer as a network printer, refer to “Installing onto Windows 95/98 without Using the Plug & Play Function”.
1) Turn the computer on and start Windows 98.
•The “Add New Hardware Wizard” window appears automat- ically, click the [Next] button.
Note: If the “Add New Hardware Wizard” window does not ap- pear in this step, refer to “Installing onto Windows 95/98 without Using the Plug& Play Function”.
2)Display a list of all the printer drivers by checking “Display a list of all the drivers in a specific location, ...” and clicking the [Next] button.
3) Click the [Have Disk...] button.
4)Insert the SHARP Software
5)Choose the appropriate printer driver from those listed below and click the [Next] button.
•PCL6 Printer Driver: SHARP
•PCL5e Printer Driver: SHARP
Note: It is recommended that you install the PCL6 printer driver. If you have a problem printing from older software using the PCL6 driver,remove it and install the PCL5e driver.
6)After Windows finds the printer driver, click the [Next] button to continue the installation.
7)Print a test page by clicking the [Finish] button.
Note: If you check “No” and click the [Finish] button, the printer does not print a test page after the installation.
• The printer driver installation begins.
8)When the test page is printed properly, click the [Yes] button.
• The printer is ready for printing.
3 – 5