C.Installing onto Windows 95/98 without Using the Plug & Play Function
Computers using Windows 95 or Windows 98 that are compatible with plug & play can install the printer driver automatically. However, if your computer is incompatible with plug & play, or if you want to use this printer as a network printer, follow the procedure in this section.
The following steps use Windows 98 in display examples.
1)Turn the computer on and start Windows 95/98.
2)Click the Start menu, point to “Settings”, and choose “Printers”.
3)When the “Printers” window appears,
4)Click the [Next] button.
5)If the screen for choosing the connection method appears, choose the connection method and click the [Next] button.
Note: This screen appears only when the computer is connected to a network.
•When the printer is directly connected to the computer, choose “Local printer”.
Otherwise, choose “Network printer”.
If you choose “Network printer” you must specify a network path or queue name.
Contact your network administrator for details.
The following steps use the example of a local printer.
6) Click the [Have Disk...] button.
7)Insert the SHARP Software
8)Choose the appropriate printer driver from those listed below and click the [Next] button.
•PCL6 Printer Driver: SHARP
•PCL5e Printer Driver: SHARP
Note: It is recommended that you install the PCL6 printer driver. If you have a problem printing from older software using the PCL6 driver,remove it and install the PCL5e driver.
9)Choose the port and click the [Next] button.
Note: This screen appears only if you selected “Network printer” in step 5).
10)Set the printer name.
<1> If you want to change the printer name, enter a new name in the space provided.
<2> If the program displays, “Do you want your
<3> Click the [Next] button.
11)Print a test page by clicking the [Finish] button.
Note: If you check “No” and click the [Finish] button, the printer does not print a test page after the installation.
•The printer driver installation begins.
12)When the test page is printed properly, click the [Yes] button.
•The printer is ready for printing.
3 – 6