Sharp AR-PB8 specifications Option, LCD kit

D.	Option
(1)	LCD kit
		Key	6 pcs.
			(LINE, MENU, ITEM, ←, →, ENTER)
AR-PA1
		Lamp	2 (DATA, ONLINE)
		Display	20 digits ⋅ 2 lines

∗When installing the AR-PB8 to a model which is not equipped with the LCD panel, the LCD kit (AR-PA1) must be installed to.

a.LCD message

Status	LCD display		Content
		AUTO	Auto select to
			emulation
Online	Online	PCL	PCL
		PS2∗A	PS2∗A
		HEX	HEX
	Data Loss	Press ENTER
	Error
	Memory Full	Press ENTER
		Tray 1 <Paper Size>
		Tray 2 <Paper Size>	When the paper
		Tray 3 <Paper Size>	feed tray is
			selected to other
		Tray 4 <Paper Size>
	Paper Out		than AUTO.
		Bypass <Paper
Error		Size>
		Tray <Paper Size>	When the paper
			feed tray is
			selected to AUTO.
			Toner empty
	Check Panel		Drum replacement
			Cover open
			Service call error
	Clear Paper		Paper jam
	Path		Paper exit tray full
		Copies	Printing of the set
			quantity is made.
		Resolution	Printing at the set
			resolution is made.
		Smoothing	Smoothing function
			setting.
		Toner Save	Toner save mode
			setting
	Main Menu	Page Protection	Setting of page
			protection function
			Setting of duplex
User		2-Sided Printing∗B	function and
			binding direction
setting
		Paper Source	Tray select
		Paper Size	Paper size select
		Orientation	Setting of print
			direction
		Emulation	Emulation setting
		Set IP Address	IP address setting
			is made.
	Network	Set Subnet Mask	Subnet Mask
	Menu ∗1		setting is made.
		Set Default	Default Gateway
		Gateway	setting is made.

1 – 3

							AR-PB8
Status				LCD display			Content
					Enable TCP/IP		Enable/Disable
							TCP/IP
					Enable Netware		Enable/Disable
	Network						Netware
	Menu ∗1				Enable EtherTalk		Enable/Disable
							EtherTalk
					Reset to Defaults		Reset Print Server
							Card to default
	PS2 Menu				Print PS2 Error		Setting of printing in
	∗2, ∗A						case of PS Error
User
							If data reception is
setting
	Interface						not completed
					I/O Time Out		within the set time,
	Menu
							it is judged as a
							time out error.
					Configuration Page		Configuration page
							is printed.
	Test Printing				PCL6 Font Page		PCL6 Font page is
	Menu						printed.
					PS2 Font Page		PS2 Font page is
							printed∗A.
∗1 When installing the network Interface card.
∗2 When installing the AR-PS1.
b. LED display
						Indicates that the printer is
						off-line and data cannot be
						transferred or printed. Make
		Extinguished				settings from the operation
						panel in this mode. Note,
ON LINE light						however, that you cannot make
						settings if the “Data Remaining”
						message is displayed.
						Indicates that the printer is
		Lit				on-line and data can be
						transferred and printed.
		Extinguished				Indicates that there is no data
						being received or processed.
						Indicates that the printer is
DATA light		Lit				receiving or processing print
						data.
						Indicates that there is print data
		Blinking				remaining in memory that has
						not yet been printed.
c. Operation keys
			Changes between the on-line and off-line
			modes.
			When the printer is on-line, it can receive data
LINE key			from the computer with which it is connected.
			When the printer is off-line, you can use
			operation panel keys to make print settings.
			Note, however, that you cannot make settings
			if the "Data Remaining" message is displayed.
MENU key			Used to show setting menus on the display in
			sequence.∗
ITEM key			Used to show the setting items of the selected
			menu in sequence.∗
Left arrow key			Used to change the value of any item.∗
Right arrow key
ENTER key			Used to enter a new value.

∗Invalid when the printer is on-line.