SETTINGS
Communication Setup
This allows you to perform and/or change the communication setting. This setting is required to use
NOTE
•Make sure that the LAN cable is connected to this Player. (See page 18.)
•For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting.
−IP address, netmask, gateway, DNS address
•Besides, if specifying a proxy server, the following information specified from your internet service provider is also required. Confirm the information prior to the setting.
−IP address and port number of the proxy server
1Press SETUP to display the Menu screen.
2Press a/b to select “Settings”, then press d or
ENTER.
3Press a/b to select “Communication Setup”, then press d or ENTER.
4Press ENTER, then press a/b to select “Change”, and then press ENTER again.
Current Ethernet setup info.
IP Address | : Auto Setup |
Netmask | : Auto Setup |
Gateway | : Auto Setup |
DNS | : Auto Setup |
Proxy | : Not Use |
|
|
| Change |
|
|
| Initialize |
•For initializing the current setting, select “Initialize”, then press ENTER.
5For setting the IP address, press c/d to select “Yes” or “No”, then press ENTER.
Do you obtain the IP address automatically?
Yes |
| No |
IP Address
Netmask
Gateway
Next
•If selecting “Yes”: The IP address is automatically obtained.
•If selecting “No”: The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 44.)
Regarding each of the setup values, confirm the specifications of your broadband router.
6Select “Next”, then press ENTER.
• If selecting “Yes” in the step 5, go to the step 9.
7Enter your DNS address. Enter your DNS address.
Primary
Secondary
Next
•The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 44.)
Regarding each of the setup values, confirm the specifications of your broadband router.
8Select “Next”, then press ENTER.
9For setting the proxy server, press c/d to select “Yes” or “No”, then press ENTER.
Do you use the proxy server?
Yes |
| No |
Address
Port
Next
•If selecting “Yes”: The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 44.)
•If selecting “No”: Go to the next step.
10Select “Next”, then press ENTER.
42
