SETTINGS

 

 

 

 

 

 

6 During access to the network and checking the

 

Manual Update from Network

 

 

latest version of firmware, “Accessing” blinks.

This function allows you to perform the update

 

• The current version of this unit software and the latest

 

version of the update file on the network are displayed

operation by accessing an internet connection

 

when latest version of firmware has been found.

manually to check if there is a new firmware version.

 

To update this player software with update file, select

 

 

NOTE

 

 

 

“Yes”, and go to step 7.

 

 

 

 

 

Latest version of firmware has been found.

 

Make sure that the LAN cable is connected to this player.

 

 

 

(See page 18.)

 

Firmware update is available.

 

Make sure to perform the communication settings. (See

 

Proceed with update?

xxxxxxxxxx

 

 

pages 42–44.)

 

Current Version :

 

It may take time to access and download the update

 

Latest Version :

yyyyyyyyyy

 

 

depending on the internet connection and other factors.

 

If “Yes” will be selected, version update will start.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

 

 

Yes

 

 

 

 

 

 

 

 

 

Do not remove the LAN cable or unplug the AC cord while

 

 

No

 

 

 

 

 

 

downloading or updating software.

• If the firmware has already been updated to the latest version, the following message appears.

Present version of firmware is latest version.

You do not need to update.

Version :xxxxxxxxxx

OK

• If the internet connection has failed, an error message appears.

Retry to perform the update after checking if the LAN cable connection (page 18) and internet settings (pages 42–44) are performed properly.

7 Press ENTER to start updating.

Downloading latest firmware…

Version : yyyyyyyyyy

1Press SETUP to display the Menu screen.

2Press a/b to select “Settings”, then press d or

ENTER.

3Press a/b to select “Software Update Settings”, then press d or ENTER.

4Press a/b to select “Manual Update”, then press d or ENTER.

5Press a/b to select “Network”, then press

ENTER.

30%

8When the software is successfully updated, a screen is displayed indicating that the update process is completed.

If the update has failed, an error message appears. Retry to perform the update after checking if the LAN cable connection (page 18) and internet settings (pages 42–44) are performed properly.

9Press POWER to turn off the player.

Settings

47

Page 49
Image 49
Sharp BD-HP52U operation manual Manual Update from Network