Sharp CD-BA250, CD-BA2600 Remote Control, „Battery installation, „Test of the remote control

Remote Control

Preparation for Use - Remote Control -

„Battery installation

Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).

Batteries are not included.

1Remove the battery cover.

2Insert the batteries according to the direction indicated in the bat- tery compartment.

When inserting or removing the batteries, push them toward the battery termi- nals.

3Replace the cover.

Precautions for battery use:

zReplace all old batteries with new ones at the same time.

zDo not mix old and new batteries.

zRemove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.

Caution:

zDo not use rechargeable batteries (nickel-cadmium battery, etc.).

zInstalling the batteries incorrectly may cause the unit to malfunction.

Notes concerning use:

zReplace the batteries if the operating distance is reduced or if the operation becomes erratic.

zPeriodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.

zExposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit.

zKeep the remote control away from moisture, heat, shock, and vibrations.

„Test of the remote control

Face the remote control directly to the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music.

Remote sensor

8" - 20'

(0.2 m - 6 m)

12

00/12/4 CD-BA250(U)2.fm