Listening to the memorized station
„Memorizing a station
You can store 40 AM and FM stations in memory and recall them at the push of a but- ton. (Preset tuning)
1 Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2 Press the MEMORY/SET button to enter the preset tuning saving mode.
3 Within 30 seconds, press the 
PRESET 
or 
PRESET 
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY/SET button to store that station in memory.
If the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a preset sta- tion.
When a new station is stored in memory, the station previously memorized will be erased.
Note:
The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord disconnection.
„To recall a memorized station
Press the 
PRESET 
or 
PRESET 
button for less than 0.5 seconds to select the desired station.
Preset channel | Frequency and frequency band |
This can be operated by pressing the PRESET (
or 
) button on the remote control.
„To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1 Press the 
PRESET 
or 
PRESET 
button for more than 0.5 seconds.
zThe preset number will flash and the programmed stations will be tuned in se- quentially, for 5 seconds each.
zThis can be operated by pressing the PRESET (
or 
) button on the remote control.
2 Press the 
PRESET 
or 
PRESET 
button again when the desired station is located.
„To erase entire preset memory
1Press the
2Press the
Radio - Listening to the memorized station -
Listening to the Radio (See page 20.)
21
