![Dubbing from Tape to Tape](/images/new-backgrounds/10807/1080749x1.webp)
Dubbing from Tape to Tape
You can record from TAPE 1 to TAPE 2.
For recording, use only normal tapes. Do not use metal or CrO tapes.
1 Press the
2 Load a prerecorded cassette into the TAPE 1 cassette compart- ment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as the master tape.
3 Press the TAPE (1 2) button until "TAPE 1" appears on the dis- play.
4 Press the REC PAUSE (
) button.
Recording will be paused.
5 Press the /
button on the main unit or the TAPE 2
button on the remote control to start dubbing.
To stop dubbing:
Press the |
| (TAPE |
|
| ) button. | |
|
| |||||
TAPE 1 and TAPE 2 will simultaneously stop. | ||||||
„ Erasing recorded tapes | ||||||
1 | Load the tape to be erased into the TAPE 2 cassette compartment with the side to | |||||
| be erased facing toward you. | |||||
2 | Press the TAPE (1 2) button until "TAPE 2" appears on the display. | |||||
3 | Press the REC PAUSE ( ) button. | |||||
4 | Press the / | button on the main unit or the TAPE 2 button on the remote con- |
trol to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
Recording | from Tape to Tape - |
Tape | Dubbing |
| - |
|
|
25
00/12/4