Sharp CD-ES99, CD-ES900 manual Placing the speaker system, Antenna connection, t -- Red

•Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS terminal and

position the FM antenna wire in the direction where the strongest signal can be received.

CD-ESg00

CD-ES99

• Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wal! with screws (not sup- plied).

i' ii'iII :II!

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better

reception.

Installing the AM loop antenna:

< Assembling > < Attaching to the wall >

t_-- Red

_. _ Black

Caution:

Use speakers with an impedance of 6 ohms or more, as lower im-

pedance speakers can damage the unit. Do not mistake the right and the left chan-

nels. The right speaker is the one on the right side when you face the unit.

Do not let the bare speaker wires touch each other.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

Do not stand or sit on the speakers. You may Incorrect be injured.

•Placing the speaker system

The left and right speakers	have individual shapes.	For best perfor-
mance, place the speakers	according to the diagram	below.
Left speaker	Right speaker

Wall Screws (not supplied)

Note:

The speaker grilles are not removable.

11