Sharp CD-ES900 Memorizing a station, To recall a memorized station, To scan the preset stations

OO-ES_9OOListening-ESg00 to the radio (continued)

•Memorizing a station

You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

Perform steps 1 - 3 in "Tuning" on page 21.

2 Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode.

3 Within 30 seconds, press the PRESET (v or A) button to select the preset channel number,

Store the stations in memory, in order, starting with preset channel I.

4 Within 30 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory.

if the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a pre- set station.

When a new station is stored in memory, the station previously memorized wi!l be erased.

Note:

The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord disconnection.

•To recall a memorized station

Press the PRESET (v or A) button for less than 0.5 seconds to se- lect the desired station.

•To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre- set memory scan)

1Press the PRESET (v or/'-) button for more than 0.5 seconds. The preset number will flash and the programmed stations wil! be tuned in sequentially, for 5 seconds each.

2Press the PRESET (v or A) button again when the desired sta- tion is located.

O

_MEMORY

OO

•To erase entire preset memory

1Press the ON/STAND-BY button to enter the stand-by mode.

2While pressing down the ® button and the X-BASS/DEMO but-

ton, press the CLOCK/TIMER button until "TUNER CL" appears.

22