Sharp CD-ES900 oo-Es 9Systemconnections continued, I *I rll 75ohm, AC power connection, F ante na

CD-ESg00

oo-Es_9System connections (continued)

•AC power connection

After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.

Notes:

•The unit will start the tape initialization when plugged in to the AC outlet. During this process, an initializing sound wil! be heard and the unit cannot be turned on. Wait until the process is finished.

•Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.

Cooling fan:

This product is equipped with a cooling fan inside, which begins to run once the power is on for better heat radiation.

•Demonstration mode

The first time the unit is plugged in, the unit wil! enter the demonstration mode.

You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se- lect the extra bass mode.

• Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult your dealer.

A"Te_"_--	F ante na
	Outdoor
I °*I_(_rll 75ohm
_:'_" ,, coaxial cable

Note:

When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.

12