Setting the clock
In this example, the clock is set for the
Press the
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the _ _ or _* P,_ button to se-
lect "CLOCK", and press the MEMORY/SET button.
I |
|
|
|
| l | _ | i r | F _ r i r F | t |
4 Press | the I_ | _ | or _,_ | _t button | to | select |
| or 24- | |
hour display and then press the MEMONY/SET button. |
| ||||||||
"AM | I2:00 | _ | The | display | witl appear. |
| |||
|
|
| (AM | I2:00- | PM | 1"I:59) |
|
| |
"AM | 0:00" | The | display | will appear. |
| ||||
|
|
| (AM | 0:00- | PM | I1:59) |
|
| |
%:00" |
| _ | The | display | witl | appear. |
| ||
(O:0O - 23:59)
oo-EsgO
5Press the P4_ ,,_ or _'_ _ button to adjust the hour and then
press the MEMORY/SET button.
Press the t_ _ or I_- _ button once to advance the time by I hour. Hold it down to advance continuously.
6Press the I_1 _ or _- I_,l button to adjust the minutes and
then press the MEMORY/SET button.
L | _ f_ | L |
Press the I_1 _1_1or _ _l button once to advance the time by I minute, Hold it down to change the time in
To confirm the time display:
[When the unit is in the
Press the CLOCK/TIMER button.
The time display wilt appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the I_,_ _ or _- _ button to disptay the time. The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time dis- play when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not appear in step 3, step 4 (for selecting the
To change the
IClear all the programmed contents. [Refer to "Clearing al! the memory (reset)" on page 33 for details.]
2 Perform "Setting the clock" from step 1.
Note:
The clock can also be set with the remote control.
15
