Sharp CD-ES900 manual Recording from the radio, Dubbing from tape to tape, Erasing recorded tapes

CO-Es_CORecording-ES 00 on a cassette tape (continued)

Recording from several CDs continuously:

tPerform steps I - 5 in "Recording from a CD (CDs)" on page 25.

2 Within 5 seconds, press the _ / _.

To perform programmed recording:

I Program discs and tracks. (See page 20.) 2 Press the Ol button.

3 Press the I_/_.

To stop recording:

Press the [] button.

The CD and tape will stop.

•Recording from the radio

Tune in to the desired station. (See page 24.)

2Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be performed.

3Press the _11 button.

Recording wilt be paused. _z ,_//.- _:_-"]

4 Press the I_ / r: button to start recording.

To interrupt recording:

Press the ell button.

To resume recording, press the _ / _ - button.

To stop recording:

Press the [] button.

Note:

if you hear a whistling noise while recording an AM station, move the AM loop antenna.

•Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.

1 Press the ON/STAND-BY button to turn the power on.

2 Load a prerecorded cassette

into the TAPE I cassette com-

partment. Insert a blank tape

into the TAPE 2 cassette com- partment.

It is recommended that the recording tape is the same length as the master tape.

3Press the TAPE (4 -- 2) button until "TAPE 1" appears on the display.

4Press the ®H button.

Recording wil! be paused.	_ , i _.	2:_-"
	/TF_'*"
5 Press the _" / _, button to start dubbing.
To stop dubbing:
Press the m button.
TAPE I and TAPE 2 wil! simultaneously	stop.

•Erasing recorded tapes

1Load the tape to be erased into the TAPE 2 cassette compart- ment with the side to be erased facing toward you.

2Press the TAPE (I -- 2) button until "TAPE 2" appears on the dis- play.

3Press the ®1111button.

4 Press the _" / button to start erasing.

Note:

Make sure that the TAPE 1 is not in use.

26