Programmed play
You can choose up to 32 selections for playback in the order you like.
1While in the stop mode, press the MEMORY button to enter the pro- gramming save mode.
2Press one of the 
1 - 
5 buttons
to select the desired disc.
Selected disc number
3Press the direct search buttons
on the remote control to select the desired track.
Selected track number
You can also select a track by pressing the
or
button.
4 Press the MEMORY button to save the track number.
5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.
6 Press the 
(CD 
) button.
The total number in memory will ap- pear.
7 Press the 
/ 
button to start playback.
To clear the programmed selections: Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last track pro- grammed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the 
or 
button.
Notes:
When a disc with programmed tracks is ejected, the program is automatically canceled.
Even if you press the
During the program operation, random play is not possible.
CD or MP3/WMA disc Playback
23