CD-SW300

References

Maintenance

Cleaning the tape-handling parts

Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.

When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.

TAPE 1

 

A

B

C

 

 

 

 

 

 

 

D

E B

C

TAPE 2

 

 

 

 

Playback head

 

Erase head

Capstan

 

Recording/Playback head

 

Pinch roller

 

 

After long use, the deck's heads and capstans may become mag- netized, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use.

Cleaning the CD pickup lens

In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the laser pickup lens) should be performed periodically. Lens cleaners are commercially available. Contact your local CD software dealer for options.

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap so- lution, then with a dry cloth.

Caution:

Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish.

Do not apply oil to the inside of the unit. It may cause malfunc- tions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source

AC 120 V, 60 Hz

 

 

Power consumption

P W

 

 

Dimensions

Width: 10-1/4" (260 mm)

 

Height: 13" (330 mm)

 

Depth: 12-7/8" (323 mm)

 

 

Weight

P lbs. (P kg)

 

 

Amplifier

Output power

Front Speaker: 115 watts minimum RMS per

 

channel into 6 ohms from 100Hz to 20 KHz,

 

10% total harmonic distortion.

 

Subwoofer: 220 watts RMS into 12 ohms

 

from 50Hz to 120 Hz, 10% total harmonic

 

distortion.

 

 

Output terminals

Front Speakers: 6 ohms

 

Subwoofer: 12 ohms

 

Headphones: 16 - 50 ohms

 

(recommended: 32 ohms)

 

Video output: 1Vp-p

 

 

Input terminals

Game/ Auxiliary (audio signal):

 

500 mV/ 47 k ohms

 

Game/Video: 1Vp-p

 

 

42