To perform programmed recording:
1Program discs and tracks (see page 23).
2Press the 
button.
3Press the 
/ 
(TAPE 
) button to start recording.
To stop recording:
Press the 
(TAPE 
) button.
The disc and tape will stop.
Recording from the radio
1Tune in to the desired station (see page 28).
2Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3 Press the 
button.
Recording will be paused.
4Press the 
/ 
(TAPE 
) button to start recording.
To interrupt recording:
Press the 
button.
To resume recording, press the 
/ 
(TAPE 
) button.
To stop recording:
Press the 
(TAPE 
) button.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1Press the
2Load a prerecorded cassette
into the TAPE 1 cassette com- partment. Insert a blank tape into the TAPE 2 cassette com- partment.
TAPE 1 
TAPE 2
It is recommended that the recording tape is the same length as the master tape.
3Press the TAPE (1 
2) button until "TAPE 1" appears on the display.
4 Press the 
button.
Recording will be paused.
5Press the 
/ 
(TAPE 
) button to start dubbing.
To stop dubbing:
Press the 
(TAPE 
) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
Tape Recording
| 1 | Load the tape to be erased into the TAPE 2 cassette compart- | |||||||||
Note: |
| ment with the side to be erased facing toward you. | |||||||||
If you hear a whistling noise while recording an AM station, move the | 2 | Press the TAPE (1 |
| 2) button until "TAPE 2" appears on the dis- | |||||||
| |||||||||||
| |||||||||||
AM loop antenna. |
| play. |
|
|
|
|
|
|
|
|
|
| 3 | Press the |
|
| button. | ||||||
|
|
| |||||||||
|
|
| |||||||||
| 4 | Press the |
| / |
| (TAPE |
| ) button to start erasing. | |||
|
|
| |||||||||
|
|
| |||||||||
|
|
| |||||||||
|
|
| |||||||||
Note:
Make sure that the TAPE 1 is not in use.
33