CD-SW300

Timer and sleep operation (Remote control only)

Advanced Features

Timer playback:

The unit turns on and plays the desired source (CD, tuner, tape) at a preset time.

Timer recording:

The unit turns on and starts recording from the tuner at the preset time.

This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.

Once timer: Once timer play or once timer recording works for one time only at a preset time.

For example, if you are away but want to record a program on a radio station.

Daily timer: Daily timer play or daily timer recording works at

the same preset time every day.

For example, set the timer as a wake-up call every morning.

Using the once timer and daily timer in combination:

For example, use the once timer to record a radio program, and use the daily timer to wake up.

1Set the daily timer (pages 34 - 36).

2Set the once timer (pages 34 - 36).

 

1 minute or more

 

 

 

Daily timer

 

Once timer

Start

Stop

Start

Stop

Note:

When set times for the daily timer and once timer overlap, the once timer takes priority. Allow an interval of at least 1 minute between op- erations.

Timer playback or timer recording

Before setting timer:

1Check that the clock is set to the correct time (refer to page 16). If it is not set, you cannot use the timer function.

2For timer playback: Load a cassette or discs to be played.

For timer recording: Load a cassette for recording in the cas-

sette compartment.

1Press the ON/STAND-BY button to turn the power on.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the or button to se- lect "ONCE" or "DAILY", and press the MEMORY button.

Set the clock to the correct time if "ONCE" or "DAILY" does not appear.

Continued to the next page

34