Connecting the Projector to Other Devices

Connecting to Component Video Equipment Using a 3 RCA to 15-pin D-sub Cable and the DVI to 15-pin D-sub Adaptor (INPUT 2)

Use a 3 RCA to 15-pin D-sub cable and the DVI to 15-pin D-sub adaptor when connecting component video equipment such as DVD players and DTV decoders to INPUT 2 terminal.

1 Connect a DVI to 15-pin D-sub adaptor to the projector.

Optional accessories

3 RCA to 15-pin D-sub cable Type: AN-C3CP (9'10" (3.0 m))

DVI to 15-pin D-sub adaptor Type: AN-A1DV (7.9" (20 cm))

2 Connect a 3 RCA to 15-pin D- sub cable to the above adaptor.

•Secure the connectors by tightening the thumbscrews.

3 Connect the above cable to the video equipment.

Note

•When connecting this projector to com- ponent output terminal of the DTV de-

coder, select “Component” for “Signal

Type” on the OSD menu or press on the remote control. (See page 52.)

•Make sure to turn both the projector and the video equipment off before connect- ing.

To INPUT 2 terminal

DVI to 15-pin D-sub adaptor (sold separately)

3 RCA to 15-pin D-sub cable (sold separately)

To analog component output terminal

DVD player or DTV decoder

-18