Connecting the Projector to Other Devices
Connecting to Video Equipment with the DVI Output Terminal Using a DVI Cable (DIGITAL INPUT)
Use the DVI cable when connecting video equipment with the DVI output terminal such as DVD players and DTV decoders to DIGITAL INPUT terminal.
1 Slide the “DIGITAL INPUT TYPE” switch on the back terminal board to “VIDEO”.2 Connect the DVI cable to the DIGITAL INPUT terminal.3 Connect the other end to the corresponding terminal on the DVD player or DTV decoder.
•Secure the connectors by tightening the thumbscrews.
Note
•Select DIGITAL INPUT mode when con- necting to video equipment with the digi- tal output terminal. (See page 31.)
•Make sure to turn both the projector and the video equipment off before switching the “DIGITAL INPUT TYPE” switch and connecting.
Optional | DVI cable | |
Type: | ||
accessory | ||
(9'10'' (3.0 m)) | ||
|
To DIGITAL INPUT | DIGITAL INPUT |
terminal | |
| TYPE switch |
DVI cable
(sold separately)
To DVI digital output terminal
DVD player or
DTV decoder
-20