Picture Setting Function

This function stores all items set in “Picture”. Five settings can be stored separately in “Memory 1” to “Memory 5”. Each stored setting is reassigned to each input mode (INPUT 1 to INPUT 4 and DIGITAL).

Even when the input mode or signal is changed, you can easily select optimal settings from the stored settings.

■Storing the Adjustment Val- ues for Each Memory Num- ber

Select “Picture Setting” on the “Picture ” menu and the memory location where you want to store the settings. Then adjust the setting items on the “Picture” menu.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

 

 

Memory

Settings of all items in “Picture” can be

1-5

stored for the respective input modes.

 

The stored settings can be selected in

 

any input modes.

 

 

Memory

Besides “Memory 1” to “Memory 5”,

OFF

other settings on the “Picture” menu

 

can be stored for each input mode.

 

The settings stored in “Memory OFF”

 

cannot be applied when another input

 

mode is selected.

 

 

■Applying the Stored Settings

If you want to apply the stored settings on the “Picture” menu, select “Picture Setting” on the “Picture” menu and the memory location where you have stored the settings.

Note

• This function can be operated using the

on the projector or on the remote control, as well as the OSD menu screen.

Each time or is pressed, the memory number changes as shown be- low.

Memory 1

Memory 2

Memory 3

Memory OFF

Memory 5

Memory 4

On-screen Display

PICTURE SETTING button

and Adjustments

Settings

PICTURE SETTING button

-47