Adjusting the Computer and DVD/DTV Images
Auto Sync Adjustment

Used to automatically adjust a computer im- age.

Select whether the image is to be synchronized automatically when switching the signal with “ON” or “OFF”.

Select “Auto Sync” in the “Fine Sync” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

On-screen Display

(ON)

Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer.

Auto Sync adjustment is not (OFF) automatically performed.

Note

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 48.)

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•“Auto Sync” cannot be used in the DIGI- TAL INPUT mode.

•Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote control.

Checking the Input Signal

This function allows you to check the current input signal information.

Select “Signal Info” in the “Fine Sync” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Note

•540P is displayed on the screen when signal 1080I is inputted during DVI con- nection.

AUTO SYNC button

On-screen Display

-50