
Using the “Options” Menu
Automatic Power Shutoff FunctionWhen no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if set to “” (ON).
Select “Auto Power Off” in the “Options” menu on the menu screen.
➝For operating the menu screen, see pages 38 to 41.
Selected Item | Description |
Projector automatically enters the standby mode after 15 minutes without an input signal.
Automatic Power
Note
•“Auto Power Off” is factory preset to “”.
•When the Auto Power Off function is set to
“ (ON)”, 5 minutes before the projector enters the standby mode, the message “En- ter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.
This function allows you to select the desired position of the menu screen.
Select “Menu Position” in the “Options” menu on the menu screen.
➝For operating the menu screen, see pages 38 to 41.
Selected Item | Description |
|
|
Center | The menu is displayed on the |
| center of the image. |
Upper | The menu is displayed on the |
Right | upper right of the image. |
Lower | The menu is displayed on the |
Right | lower right of the image. |
Upper | The menu is displayed on the |
Left | upper left of the image. |
Lower | The menu is displayed on the |
Left | lower left of the image. |
|
|
-54