Sharp EL-9900 operation manual Zint1prop and 15 Zint2prop, Example

Chapter 10: Statistics & Regression Calculations

•16 InputList and 17 InputStats specify the above input methods.

16 InputList: Sets the input mode to the statistic data list method

17 InputStats: Sets the input mode to the value input mode

For example, press SE16Eto set to the list input mode.

5. Press @hto execute the hypothesis test.

Note: • Either list input or parameter input may be used for tests other than 01 χ2test, 05 TtestLinreg, 10 Ztest1prop, 11Ztest2prop,

14 Zint1prop and 15 Zint2prop.

•To clear the contents entered in Freq, move the cursor to the list name then press DE.

01χ2 test Uses the sample data from a two-dimensional table represented by a matrix.

Example
If mat A =	3 2 5 4
	6 1 3 8
	2 3 5 1

execute the χ2test and store the obtaining results in mat B.

1.Press SE01.

2.Enter mat A as the Observed Matrix, and mat B as the Expected Matrix.

Press @mA 1E@m A2.

3.Press @hto execute the χ2 test.

The result is entered in mat B.

χ2: χ-squared statistic for the test

p:p value for the test df: degrees of freedom

166