General problems
Problem |
| Solution |
|
|
|
Nothing appears in the | • | Make sure the power cord is properly plugged into |
display. |
| a power outlet. |
| • Connect another electrical appliance to the outlet to | |
|
| see if it has power. |
|
|
|
The machine does not | • | If a beep sound is not made when you press the |
respond when you press |
| keys, unplug the power cord and then plug it in |
any of its keys. |
| again several seconds later. |
|
|
|
Automatic document | • | Check the size and weight of the document (see |
feeding does not work for |
| Transmittable Documents in Chapter 2). |
transmission or copying. |
|
|
|
|
|
Voice calls taken on an | • | The fax may interrupt during a voice call if the |
extension phone are |
| reception mode is set to A.M. To prevent |
interrupted by the fax. |
| interruption on a tone dial extension phone, press |
|
| any three keys on the extension phone after |
|
| answering. (Note: Do not enter the code to activate |
|
| fax reception.) |
|
|
|
No reception occurs when | • | Make sure you have not run out of paper. |
polling is attempted. |
|
|
| • | Make sure the transmitting machine is in automatic |
|
| reception mode. |
| • | If the transmitting machine has polling security, |
|
| make sure that your fax number has been entered |
|
| both in your machine and in the transmitting |
|
| machine. |
|
|
|
Bell Tinkle | • | The operation of this equipment on the same line |
(New Zealand) |
| as the telephone or other equipment with audible |
|
| warning devices or automatic ring detectors will |
|
| give rise to bell tinkle or noise and may cause false |
|
| tripping of the ring detector. Should such a problem |
|
| occur, contact your authorised Sharp Service |
|
| Centre for information. |
|
|
|
94
