Sharp FO-DC535, FO-DC635 Note:, Setting 13: COPY CUT-OFF, Setting 12: COPY SCANNING, Setting 10: AUTO COVER SHEET, Setting 11: FAX SCANNING WIDTH

Optional Settings

Setting 09: ERROR CORRECTION MODE (ECM)

Select YES to have any distortions in a transmission due to noise on the telephone line corrected before print-out at the receiving end. This is only effective when the other machine has ECM as well. Select NO to turn the

function off. Press	or	to make the selection and then press	START/
			ENTER .

Note: If the transmission or reception is taking place in Super G3 mode, ECM will operate regardless of the ECM setting.

♦Initial setting: YES

Setting 10: AUTO COVER SHEET

Select YES to have the fax automatically generate a cover sheet and send it as the last page of each transmission. Select NO to turn the function off.

Press	or	to make the selection and then press	START/
			ENTER .

♦Initial setting: NO

Setting 11: FAX SCANNING WIDTH

This setting selects the maximum scanning width. Press or to

START/

select 10 inches or 8.3 inches, and then press ENTER .

♦Initial setting: 10 inches

Setting 12: COPY SCANNING

This setting is used to reduce copies slightly before printing to ensure that

data on the edges are not cut off. Press or to select AUTO for

START/

automatic reduction, or 100% for no reduction, and then press ENTER .

♦Initial setting: 100%

Setting 13: COPY CUT-OFF

This setting determines how the machine will copy documents that are longer than the printing paper. Select CONTINUE to have the remainder of the document printed on a second page, or CUT-OFF to cut off (not print) the

remainder. Press	or	to make the selection, and then press	START/
			ENTER .

♦Initial setting: CUT-OFF

204