START/ ENTER

Optional Settings

to select NO and then press . (Note that the function will turn off automatically if the selected paper source runs out of paper.)

Initial setting: NO

Note: If you turn off the Separate Mode setting, Option Setting 16 will subsequently appear in the display to allow you make an appropriate setting for cassette selection. If you don’t make a selection, AUTO SELECTION will be automatically selected.

Setting 32: BACKLIGHT SETTING

Use this setting to set the amount of time until the display backlight turns off

after the operation panel is used (after a key is pressed). Press or

to select the amount of time (3 MINUTES, 10 MINUTES, or 15 MINUTES), or select ALWAYS OFF if you never want the backlight to be on. When finished,

START/

press ENTER .

Initial setting: 3 MINUTES

Note: Settings 33 through 36 are not used.

Setting 37: FAX TRANSFER

This setting only appears if the network scanner option is installed. Select ALWAYS PRINT if you wish to have the machine print all faxes that are forwarded by the Fax Transfer function. Select PRINT ERROR ONLY to have

the machine only print faxes that are not successfully forwarded. Press

or to make the selection and then press

Initial setting: ALWAYS PRINT

START/ ENTER .

210