Sharp G14000 Subwoofer control, Subwoofer light up, Power switch, Crossover frequency control

Subwoofer control

Before you turn the system on/off on the main unit, minimize the speaker volume on the main unit and turn the VOLUME control of the subwoofer to “–”.

Subwoofer light up

The subwoofer unit surface will light up and blink according to BASS

SOUND LEVEL.

During STAND-BY MODE (demo mode):

When subwoofer is turned ON, the subwoofer unit will emit blinking light.

During STAND-BY MODE (low power consumption mode): When subwoofer is turned ON, no light will be emitted from the subwoofer unit.

Notes:

Observe the following to avoid malfunction and sound distortion. Do not set the volume too high on the main unit. The subwoofer may be damaged.

Before you switch on/off on the main unit, minimize the volume on the main unit.

Unplug the AC power cord when connecting the subwoofer cable.

Power switch

Press the POWER ON/OFF button to turn ON the Active subwoofer.

Volume control

Turn the VOLUME control clockwise to increase the volume, and turn it counterclockwise to decrease the volume.

Crossover frequency control

Adjust the high frequency cut-off point. Frequencies higher than the set frequency are removed.

To emphasize the bass, turn this control toward 35 Hz and increase the volume.

CD-G14000

Preparation for Use

17