CD-G14000Listening to a cassette tape (TAPE 1 or TAPE 2)

Tape Playback

Before playback:

For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.)

Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions.

Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil.

Tape playback

1Press the ON/STAND-BY button to turn the power on.

2Open the cassette

compartment by pushing the area marked “”.

3Load a cassette into the

TAPE 1 compartment or TAPE 2 compartment with the side to be played facing toward you.

TAPE 1 TAPE 2

4Press the TAPE (1 2) button to select the cassette you want to listen to.

5 Press the / (TAPE ) to start playback.

Tape play indicator

Auto power on function:

When you press any of the following buttons, the unit turns on. TAPE (1 2) button (main unit and remote control): The unit turns on and the “TAPE” function is activated.

TAPE button on the remote control: The unit turns on and the “TAPE” function is activated.

/ button on the main unit: The unit turns on and playback of the last function starts (CD, TAPE, TUNER, AUDIO IN).

Auto power off function:

In the stop mode of tape operation, the main unit enters the stand- by mode after 15 minutes of inactivity.

32

Page 32
Image 32
Sharp CD-G14000Listening to a cassette tape Tape 1 or Tape, Tape Playback, Before playback, Load a cassette into