Charging the main unit
Power Source -Charging the main unit-
7
Battery charge indicator (red)
Press down the unit with its front side facing toward you.
Fit to the connection terminal of main unit
Rear
LINE OUT DSC IN PC
To the wall socket
AC 100 - 240 V, 50/60 Hz
1 Connect the AC adaptor to the DC IN 5V socket on the cradle.
2 Plug the AC adaptor into the wall socket.
3 Place the main unit on the cradle.
!Press down the unit firmly.
!Battery charge indicator (red) lights up.
"About charging time
The battery fully charges in approx. 4 hours, and the battery charge indicator goes out.
Notes:
!Charge the battery within the range of 5°C - 35°C (41°F - 95°F).
!The unit and the cradle may get warm during or after charge. This is normal.
!When charging battery for the first time or after a long period of disuse, battery life may be shorter. Repeat charge/discharge cycle 4 to 5 times to restore the full capacity.
"Built-in battery
!The
!Charging time depends on the battery condition and ambient temperature.
!At low temperatures, continuous playing time is short- ened.
!Sharp shall not be liable for any damages resulting from loss or alteration of data caused by malfunction, repairs, or complete discharge of the battery.
04/5/18 |