"Moisture condensation
When the unit has condensation inside, the disk signals cannot be read, and the unit may not function properly.
In the following cases, condensation may form inside the unit.
!Shortly after turning on a heater.
!When the unit is placed in a room where there is excessive steam or moisture.
!When the unit is moved from a cool place to a warm place.
To remove condensation:
Leave the unit for approximately 1 hour. The condensa- tion should evaporate and unit will work properly.
"Upgrading the firmware
For possible firmware upgrades, visit our support web site at:
You can download firmware files to your PC to upgrade this product.
Caution:
Never format the hard disk on this product. Functions may be disabled.
Maintenance
"Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water (external sur- faces only).
Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard. Cleaning will prevent noise.
Caution:
!Do not use chemicals for cleaning (petrol, paint thin- ner, etc.). It may damage the cabinet finish.
!Do not apply oil to the inside of the unit. It may cause malfunctions.
References | Troubleshooting/Maintenance- |
| - |
|
|
46
2-
8
10
14
30
34
38
44
04/5/18 |
