Sharp GB201 Recording from a CD player, from CD, Playback sound-actuated recording

Recording from a CD player

HR-GB201

To audio output sockets CD player

Audio cable (commercially available)

"Playback sound-actuated recording

Music from CDs is recorded as MP3 files.

The unit starts recording when a signal from LINE IN socket is detected (Synchronised recording).

1 Connect a CD player to the main unit.

2 Turn on the unit (see page 8).

3 Hold down the REC button for 2 seconds or more.

00 00 00

4 Begin playback on the CD player.

!Recording will begin automatically.

To interrupt recording:

!When the CD player is stopped, the music data num- ber increases by one and the unit will enter the syn- chro recording pause mode. When playback is resumed, recording will also resume.

!If a silence lasts for 2 seconds or more, the music data number increases by one and recording will be paused (number does not increase for approximately 5 seconds after recording starts). When the unit receives sound again, recording automatically starts.

!A new music data is created when recording resumes.

To stop recording:

Press the button.

Notes:

!To cancel synchro recording, see page 40.

!You can change the recording quality (see page 40).

from CD	a CD player-
Recording	Recording from
	-

34

2-

8

10

14

30

34

38

44

HR-GB201 9JCG5230100042 04/5/18 HR-GB201_UK.fm