Sharp HR-GB201 Troubleshooting continued, References, Voice recording is not possible

HR-GB201Troubleshooting (continued)

References	Troubleshooting-
	-

45

The battery charge indicator does not light even after charging.

!Is the AC adaptor properly connected?

!Is temperature extremely high or low?

Voice recording is not possible.

!Is the unit connected with LINE IN socket.

!Is the unit in the hold mode?

Music recording is not possible.

!Is the audio cable well inserted into the LINE IN socket of the unit?

The battery runs out faster.

!The built-in battery is dead. You need to replace it (see page 8).

The operation is unstable whilst the PC and the unit are connected.

!Are you using the USB cable that was purchased sep- arately?

Windows 98 Second Edition does not recognise the unit as a portable hard drive.

!Is the USB mass storage driver (on the setup CD- ROM) installed?

The unit does not play 12 hours although it is specified in the operation manual.

!12 hours of playback is based on MP3 files encoded at a bit rate of 128 kbps. Power consumption is minimised under this condition since the unit accesses the hard disk only once every 28 minutes. Higher bit rate in- creases the access and power consumption leading to less playback time.

In audio data information playback mode, I cannot find a specific song which can be found under file browsing mode.

!The SHARP Music Manager will build the audio data in- formation database right after the audio data are trans- ferred into the unit. If you stop transferring in before the completion of file transferring, the SHARP Music Man- ager won't build the audio data information database which is required under audio data information play- back mode. Please click "Update Music Info" icon to recreate the database.

SHARP Music Manager does not start.

!You cannot open two SHARP Music Manager or more at the same time.

HR-GB201 9JCG5230100042 04/5/18 HR-GB201_UK.fm