Sharp GX-M10H(RD) General control, Setting the clock Remote control only, „To turn the power on

General control

„To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

„Display and Subwoofer light up control

The display and subwoofer light can be changed. Main unit:

1)Press DEMO/(DIMMER)/ button for more than 3 seconds. The current mode will be displayed.

2)Within 5 seconds, press DEMO/(DIMMER)/ button to change the mode.

Remote control:

Press DEMO/DIMMER button to change the mode.

MODE 1 (Display backlight on and Subwoofer light off)

MODE 2 (Display backlight off and Subwoofer light off)

MODE Off (Display backlight on and Subwoofer light on)

Notes:

z During battery/DC operation, the unit will be set to Demo mode off with display and subwoofer light in MODE 2 to reduce the battery power consumption.

z During MODE 2, press any button to light up the display backlight for a few seconds.

„Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

„Volume control

Press VOLUME +/– buttons (on main unit) or VOL +/– (on remote control) to increase or decrease the volume.

„Direct key power on function

When you press any of the following buttons, the unit turns on. z iPod /, CD /, USB / on the main unit or the remote

control: selected function is activated.

z TUNER/AUDIO IN on the main unit: last tuner or audio function is activated.

z TUNER or AUDIO IN on the remote control: the unit turns on with the selected function activated.

„$XWRSRZHURIIIXQFWLRQ

The main unit will enter the stand-by mode (when iPad, iPod, iPhone, guitar or microphone is not connected) after 15 minutes of inactivity during:

iPod:	Not docked.
Audio In:	No detection of input signal.
CD:	In the stop mode or no disc.
USB:	In the stop mode or no media.

Note:

However, if iPod or iPhone is docked, the unit will begin charging. “iPod CHARGING” will be displayed.

„Auto resume function

The auto resume function will resume the last function and playback, should there be a power failure or the AC power lead becomes disconnected. However, CD/MP3 programme and random mode are not memorised.

„Equaliser

When the EQ/(X-BASS) button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQ/(X-BASS) button repeatedly until the desired sound mode appears.

FLAT No equalisation.

ROCK For rock music.

VOCAL Vocals are enhanced.

HIP HOP For hip hop music.

SALSA For salsa music.

REGGAE For reggae music.

„Muting

The volume is muted temporarily when pressing the button on the remote control. Press again to restore the volume.

„X-Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the EQ/(X-BASS) button. The last equaliser mode will turn on.

To turn on the X-Bass mode again, press the EQ/(X-BASS) button for more than 2 seconds.

Setting the clock (Remote control only)

In this example, the clock is set for the 24-hour (0:00) display.

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CLOCK/TIMER button.

3 Within 10 seconds, press the ENTER button. To adjust the

time, press the or button and then press the ENTER button.

4 Press the or button to select 24-hour or 12-hour display and then press the ENTER button.

The 24-hour display will appear.

(0:00 - 23:59)

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

The 12-hour display will appear.

(AM 0:00 - PM 11:59)

6