Sharp GX-M10H(OR) Listening to a CD or MP3/WMA disc, „Navigating the iPod, iPhone or iPad menus

Listening to the iPod, iPhone or iPad (continued)

„Navigating the iPod, iPhone or iPad menus

1Press the MENU button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu.

2Use the TUNING ( or ) button to select an item on the menu and then press ENTER button.

Note:

When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or –) button on the main unit or the remote control. Adjusting the volume on the iPod, iPhone or iPad units give no effect.

iPod, iPhone and iPad operations:

The operations described below depend on the generation iPod, iPhone and iPad you are using.

System on operation:

When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit.

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked iPod, iPhone or connected iPad unit will automatically pause the playback.

„Various iPod, iPhone and iPad functions

Function Main unit	Remote	Operation
	control
DOCK USB	DOCK USB

Function	Main unit	Remote	Operation
		control
	Dock/USB	Dock/USB
Menu	____		Press to view the
			iPod menu during
			iPod function.
Enter	____		Press to confirm the
			selection.
Cursor	____		Press to select the
Up/			iPod menu.
Down

Listening to a CD or MP3/WMA disc

ON/STAND-BY CD

This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA fi les, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.

Play	iPod	USB	iPod	USB
Pause	iPod	USB	iPod	USB

Track up/ down

Fast forward/ reverse

Display	____
Repeat	____
Shuffle	____

Press in the pause mode.

Press in the playback mode.

Press in the playback or pause mode.

If you press the button in the pause mode, press the / button to start the desired track.

Press and hold down in the playback mode.

Release the button to resume playback.

Press to toggle display content.

Press to toggle repeat mode.

Press for more than 2 seconds to toggle shuffle mode.

MP3:

MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality.

z This system supports MPEG 1 Layer 3 and VBR files.

z During VBR file playback, time counter in the display may differ from its actual playback time.

z Bitrate which is supported by MP3 is 32 ~ 320 kbps.

WMA:

WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player.

z “MP3” and “WMA” indicator will light up after the unit reads information on an MP3 or WMA disc.

z Bitrate which is supported by WMA is 64 ~ 160 kbps.

„Disc playback

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD / button on the remote control or the main unit to select CD function.

3 Open the CD compartment by pushing the CD compartment open knob to the area marked ‘’.

4 Place the disc on the spindle, label side up.

9